Archive for category programming

Xduino forum decision

We are currently deciding to go with either phpBB or SMF. If you have experience with these forums please let us know your opinion.

The topics within the discussion forum will include but not limited to:
– Xduino IDE (including ARM Compiler) and Xduino library (with Arduino-like commands) feature request/comment/suggestion/ideas
– Interesting program/projects/library
– Help channel and trouble shooting

Let us know what you think.

, , , , , , ,

2 Comments

XDUINO IDE v0.91 notes

Arduino platform has definitely enabled a lot of people including those non-tech savvy ones to enter into the electronics worlds. From the beauty of Arduino, now comes the challenge in making Arduino-like environment accessible across as many hardware platforms as possible. This would enable the simplicity and yet powerful Arduino platform to harvest on more powerful resources provided by different hardware to overcome hardware limitations based on different needs.

This approach will never be fully realized without contributors. So all contributions are welcome. Also, comments/suggestions will be highly appreciated. : -)

Let’s see what wonders we can create together…

Now, a little about me. My name is Ram, I am an independent IT consultant based in Bangkok and really like the Arduino project but it did not fit my needs so I started playing with ARM and manage to understand a bit about it then started this project. Feel free to contact me via the Contact us page : -)
Now as XDUINO-IDE is ready for download, these are the list of components you will find in XDUINO-IDE. This platform provides ease of compiling and uploading to the ARM Cortex-M3 devices by simply clicking the button on the main interface : -).

Main components includes:

  • C++ compiler with C and C++ libraries
  • ARM Cortex-M3 stm32f series mcu firmware/software uploader
  • XDUINO library for programming with Arduino-like syntax
  • Programming template in XDUINO and general ARM styles
  • and much much more..

What are you waiting for, you can signup to download it now from Download page.

ARM Compiler is also part of the XDUINO project.

The FREE ARM Compiler is bundled within the XDUINO-IDE package. Once XDUINO-IDE has been installed,
programming with Arduino syntax or ARM general programming can be done immediately. There is no need to set compiler options. The bundled FREE ARM Compiler has been tested with Cortex-M3 STM32 Thumb-2 instructions.

With ease of programming either by XDUINO-IDE or other IDE such as Keil, IAR, etc. One can easily build embedded application with Arduino commands.
XDUINO project also comes with ARM Compiler
The FREE ARM Compiler is bundled within the XDUINO-IDE package. Once XDUINO-IDE has been installed, programming with Arduino syntax or ARM general programming can be done immediately. There is no need to set compiler options. The bundled FREE ARM Compiler has been tested with Cortex-M3 STM32 Thumb-2 instructions.
ARM Compiler is also part of the XDUINO project
The FREE ARM Compiler is bundled within the XDUINO-IDE package. Once XDUINO-IDE has been installed, programming with Arduino syntax or ARM general programming can be done immediately. There is no need to set compiler options. The bundled FREE ARM Compiler has been tested with Cortex-M3 STM32 Thumb-2 instructions.
XDUINO project also comes with ARM Compiler
The FREE ARM Compiler is bundled within the XDUINO-IDE package. Once XDUINO-IDE has been installed, programming with Arduino syntax or ARM general programming can be done immediately. There is no need to set compiler options. The bundled FREE ARM Compiler has been tested with Cortex-M3 STM32 Thumb-2 instructions.
First, we would like to thank those who have given feedback on XDUINO IDE which contains ARM Compiler, libraries, and other tools necessary for getting the Xduino project running.

Important notes:

    • If you get anti-virus warning from running the software, you can ignore it if you have signed up and downloaded the software from our site. The warnings are inaccurate. We have seen this generally happens with compressed/encrypted executable files. For some anti-virus program you might have to make it explicitly exclude the XDUINO-IDE executable file from the anti-virus software.
  • After starting the IDE if you see “Verifying” at the bottom of the IDE, it means that the IDE is trying to Verify your registration information. There is no need to wait for this to complete if you have registered properly. You can start using the IDE immediately.

, , , , ,

2 Comments

ARM compiler, uploader, programming library all in XDUINO-IDE

Please support us by donating to us so we can continue to develop this project further.



easier way to pay online!

XDUINO-IDE (v0.91) with XDUINO Library:
This contains XDUINO Integrated Development Environment with upload tools (interface for programming and uploading to the device).
Please signup at Download signup page and we’ll contact you with download instructions.

Once you have downloaded and wishes to register the software for support and to let us know who you are and how we can assist you in future you can fill the form at Registration page

XDUINO Library Only
[download id=”424″ format=”1″]

Xduino currently supports the following ARM Cortex-M3 STM32f103ret6 board.

Price: US$30 + $10shipping
(Contact us here to buy)

Currently 4 in stock

(the shipping price is for Europe, decease
USA, ed
India, Singapore for other countries please contact us)
(for big quantity order please email us)

ARM STAMP Cortex-M3 STM32F10ret6 board

ARM STAMP Cortex-M3 STM32F10ret6 board

If you are interested in getting this board you can contact us.
The board has following features:

  • 5 Serial ports
  • 48 General purpose input/output pins (GPIO)
  • 16 Analog input channels 12-bits (ADC)
  • 2 Analog output channels 12-bits (DAC)
  • 512 Kbytes of Flash memory
  • 68 Kbytes of RAM
  • 3 SPI ports (2 can do I2S)
  • 2 I2C
  • 1 USB
  • 1 CAN
  • 1 SDIO
    • Use MCU 32Bit ARM Cortex-M3 64Pin (LQFP) of “STmicroelectronics”
    • Use Crystal 8.00MHz + Phase-Locked Loop (PLL), Run 72MHz frequency with speed 1.25 DMIPS/MHz to process data that is equivalent to 90MIPS
    • Has RTC (Real Time Clock) Circuit with XTAL 32.768KHz and Battery Backup connector
    • Support In-System Programming (ISP) and In-Application Programming (IAP) through On-Chip Boot-Loader Software via Port USART1 (RS232)
    • Has RS232 Communication Circuit that uses Connector 4-PIN
    • Has 48 Bit GPIO with 5V-Tolerant for independent digital applications (maximum analog input is 3.3V)
    • Use +3.3V Power Supply
    • Connector is placed on 50 Pin Header with a distance of 2.54mm (100mil) (25 pins per side) with a distance of 1.5 inch (1500mil/38.1mm), so it is quite easy to use and expand I/O Circuit. Moreover, it can be used with Project Board and PCB.

Now as XDUINO-IDE is ready for download, these are the list of components you will find in XDUINO-IDE. This platform provides ease of compiling and uploading to the ARM Cortex-M3 devices by simply clicking the button on the main interface : -).

Main components includes:

  • Free ARM compiler
  • ARM compiler with C and C++ libraries
  • ARM Cortex-M3 stm32f series mcu firmware/software uploader
  • XDUINO library for programming with Arduino-like syntax
  • Programming template in XDUINO and general ARM styles
  • and much much more..

What are you waiting for, you can signup to download it now from Download page.

, , , , , , ,

No Comments

XDUINO-IDE v0.91 available now

XDUINO-IDE is ready for you to use with ARM Cortex-M3 STM32 boards. : -) Just fill out fill in the registration form on Download page.

Here is a screen shot:

XDUINO IDE v0.91 screen shot

XDUINO IDE v0.91 screen shot

, , ,

No Comments

XDUINO-IDE v0.91 released

XDUINO-IDE (v0.91) with integrated uploader tool is finally here. The current release will only be available for those who have bought an XDUINO board from us.

If you have bought a board from us and wants to download the IDE, site please send us a note and we’ll get back to you asap.

XDUINO package with library files has been renamed XDUINO-lib.

There is also a minor upgrade for XDUINO-lib in the just released version 0.33

Happy XDUINOing

, , , , , , , , , ,

2 Comments

Xduino 0.3 released

(So far Xduino v0.3 has only been tested on board with STM32F10ret6 mcu.)

There are a few things to keep in mind when using Xduino v0.3

Major Features:
All Arduino syntax are compatible with Xduino v0.3 (as per Arduino references and Arduino extended references page except for analogReference() command.

Serial ports
There are total of 5 serial ports so Serial1-5 commands can be used.
There is also a special serial port output command ‘printf’ this function can be used like the general C/C++ printf function on the Serial command like

Serial1.printf(“Xduino v%f”, 0.3);

Math library (math.h)
Mathematical functions are included. For full information please check this math.h page.

Standard library (stdlib.h)
Standard library functions are available. For full information please check this stdlib.h page.

Other C or C++ libraries
Other C and C++ libraries can also be included, extending the limitation of functionality.

Analog ports
All Analog input and Analog output channels have 12-bits data. This means that when reading analog channel by using analogRead() command the returned value is between 0 and 4095 and when writing to analog output channel one can write value 0 and 4095.

Analog input channels (ADC)
There are total of 15 analog input channels with the following channel name corresponding to the Pin on the board:

Analog input channel (ADC) Pin on board
0 PA0
1 PA1
2 PA2
3 PA3
4 PA4
5 PA5
6 PA6
7 PA7
8 PB0
9 PB1
10 PC0
11 PC1
12 PC2
13 PC3
14 PC4
15 PC5

Analog output channels (DAC)
There are 2 DAC channels and each correspond to a port as follow:

Analog output channel (DAC) Pin on board
1 PA4
2 PA5

AnaloglastWrite() function can be used to retrieve the last value written to the analog output (DAC) channel. For example, to get the last value written to analog output channel 2:

int lastvalue;
lastvalue=analogLastwrite(2);

Interrupts
There are total 16 interrupt channels for digital input pins, the interrupt. Each pin ‘number’ can only be assigned an interrupt. This means that interrupt cannot be assigned to PA5 and PB5 at the same time as the pin ‘number’ is the same.
(note: the interrupt handling function must appear before main() directive of the program if not declaring a function prototype)

pause(ms) and pauseMicroseconds(us)
(delay possible within interrupt routine)
Generally the use of delay functions are not possible within the interrupt handling routine and this is where pause(ms) and pauseMicroseconds(us) comes in. Just specify the number of milliseconds/microseconds to pause the program and pause will handle it even within the interrupt. Note that pause only “approximate” the time to delay.
Example: to pause for approximately 10 milliseconds

pause(10);

Important file setup
To get interrupt functions and timing function working properly the following lines must be added to stm32f10x_it.c appropriately:

void SysTickHandler(void) { SysTick_IRQ_Function(); }

void USART1_IRQHandler(void) { USART1_IRQ_Function(); }
void USART2_IRQHandler(void) { USART2_IRQ_Function(); }
void USART3_IRQHandler(void) { USART3_IRQ_Function(); }
void UART4_IRQHandler(void) { UART4_IRQ_Function(); }
void UART5_IRQHandler(void) { UART5_IRQ_Function(); }

void EXTI0_IRQHandler(void) { EXTI_ALL_IRQ_Function(); }
void EXTI1_IRQHandler(void) { EXTI_ALL_IRQ_Function(); }
void EXTI2_IRQHandler(void) { EXTI_ALL_IRQ_Function(); }
void EXTI3_IRQHandler(void) { EXTI_ALL_IRQ_Function(); }
void EXTI4_IRQHandler(void) { EXTI_ALL_IRQ_Function(); }
void EXTI9_5_IRQHandler(void) { EXTI_ALL_IRQ_Function(); }
void EXTI15_10_IRQHandler(void){ EXTI_ALL_IRQ_Function(); }

Additional minor features
digitalToggle() command can be used to toggle the digital state of the pin from high to low or from low to high. For example to toggle the state of pin PC2

digitalToggle(PC2);

Finally Xduino version 0.3 has been released. This version has all Arduino platform functions except for analogReference() function.

On top of the the above, Xduino have taken a step further by extending the functionalities above and beyond current scope. For more information please check the Documentation section.

This version also includes Keil RV-MDK project file example.

, , , , , , , , , , ,

1 Comment

About XDuino

Arduino platform has definitely enabled a lot of people including those non-tech savvy ones to enter into the electronics worlds. From the beauty of Arduino, now comes the challenge in making Arduino-like environment accessible across as many hardware platforms as possible. This would enable the simplicity and yet powerful Arduino platform to harvest on more powerful resources provided by different hardware to overcome hardware limitations based on different needs.

This approach will never be fully realized without contributors. So all contributions are welcome. Also, comments/suggestions will be highly appreciated. : -)

Let’s see what wonders we can create together…

Now, a little about me. My name is Ram, I am an independent IT consultant based in Bangkok and really like the Arduino project but it did not fit my needs so I started playing with ARM and manage to understand a bit about it then started this project. Feel free to contact me via the Contact us page : -)

, , , , , , , , , , , , , , ,

No Comments

Arduino-like library for ARM platform

Arduino platform has definitely enabled a lot of people including those non-tech savvy ones to enter into the electronics worlds. From the beauty of Arduino, now comes the challenge in making Arduino-like environment accessible across as many hardware platforms as possible. This would enable the simplicity and yet powerful Arduino platform users to harvest on more powerful resources provided by different hardware to overcome hardware limitations based on different needs.

This approach can never be realized without contributors. So all contributions are welcome. Also, more about comments/suggestions will be highly appreciated. : -)

Let’s see what wonders we can create together…

You can view the list of currently supported platforms on the Platform page

Now, a little about me. My name is Ram, I am an independent IT consultant based in Bangkok and really like the Arduino project but it did not fit my needs so I started playing with ARM and manage to understand a bit about it then started this project. Feel free to contact me via the Contact us page : -)
Arduino-like library for ARM platform

This project has been started for making ARM processor boards (the platform which is much more powerful)  be easily accessible just like Arduino. Nowadays you can find ARM boards easily.

This idea came about when running into limitation of resources provided by the ATMEGA processor and with short learning curve for Arduino platform.

This starting point focuses on ARM Cortex-M3 processor from STM32F10ret6 platform it runs at 72MHz processor 512KB of flash memory and 64KB of RAM, many several USART communication ports and a lot of GPIO pins.

Library for other boards will be added as the board gets within reach.

See more at Platform page

, , , ,

No Comments