Archive for category development tools

Xduino forum decision

We are currently deciding to go with either phpBB or SMF. If you have experience with these forums please let us know your opinion.

The topics within the discussion forum will include but not limited to:
– Xduino IDE (including ARM Compiler) and Xduino library (with Arduino-like commands) feature request/comment/suggestion/ideas
– Interesting program/projects/library
– Help channel and trouble shooting

Let us know what you think.

, , , , , , ,

2 Comments

XDUINO IDE v0.91 notes

Arduino platform has definitely enabled a lot of people including those non-tech savvy ones to enter into the electronics worlds. From the beauty of Arduino, now comes the challenge in making Arduino-like environment accessible across as many hardware platforms as possible. This would enable the simplicity and yet powerful Arduino platform to harvest on more powerful resources provided by different hardware to overcome hardware limitations based on different needs.

This approach will never be fully realized without contributors. So all contributions are welcome. Also, comments/suggestions will be highly appreciated. : -)

Let’s see what wonders we can create together…

Now, a little about me. My name is Ram, I am an independent IT consultant based in Bangkok and really like the Arduino project but it did not fit my needs so I started playing with ARM and manage to understand a bit about it then started this project. Feel free to contact me via the Contact us page : -)
Now as XDUINO-IDE is ready for download, these are the list of components you will find in XDUINO-IDE. This platform provides ease of compiling and uploading to the ARM Cortex-M3 devices by simply clicking the button on the main interface : -).

Main components includes:

  • C++ compiler with C and C++ libraries
  • ARM Cortex-M3 stm32f series mcu firmware/software uploader
  • XDUINO library for programming with Arduino-like syntax
  • Programming template in XDUINO and general ARM styles
  • and much much more..

What are you waiting for, you can signup to download it now from Download page.

ARM Compiler is also part of the XDUINO project.

The FREE ARM Compiler is bundled within the XDUINO-IDE package. Once XDUINO-IDE has been installed,
programming with Arduino syntax or ARM general programming can be done immediately. There is no need to set compiler options. The bundled FREE ARM Compiler has been tested with Cortex-M3 STM32 Thumb-2 instructions.

With ease of programming either by XDUINO-IDE or other IDE such as Keil, IAR, etc. One can easily build embedded application with Arduino commands.
XDUINO project also comes with ARM Compiler
The FREE ARM Compiler is bundled within the XDUINO-IDE package. Once XDUINO-IDE has been installed, programming with Arduino syntax or ARM general programming can be done immediately. There is no need to set compiler options. The bundled FREE ARM Compiler has been tested with Cortex-M3 STM32 Thumb-2 instructions.
ARM Compiler is also part of the XDUINO project
The FREE ARM Compiler is bundled within the XDUINO-IDE package. Once XDUINO-IDE has been installed, programming with Arduino syntax or ARM general programming can be done immediately. There is no need to set compiler options. The bundled FREE ARM Compiler has been tested with Cortex-M3 STM32 Thumb-2 instructions.
XDUINO project also comes with ARM Compiler
The FREE ARM Compiler is bundled within the XDUINO-IDE package. Once XDUINO-IDE has been installed, programming with Arduino syntax or ARM general programming can be done immediately. There is no need to set compiler options. The bundled FREE ARM Compiler has been tested with Cortex-M3 STM32 Thumb-2 instructions.
First, we would like to thank those who have given feedback on XDUINO IDE which contains ARM Compiler, libraries, and other tools necessary for getting the Xduino project running.

Important notes:

    • If you get anti-virus warning from running the software, you can ignore it if you have signed up and downloaded the software from our site. The warnings are inaccurate. We have seen this generally happens with compressed/encrypted executable files. For some anti-virus program you might have to make it explicitly exclude the XDUINO-IDE executable file from the anti-virus software.
  • After starting the IDE if you see “Verifying” at the bottom of the IDE, it means that the IDE is trying to Verify your registration information. There is no need to wait for this to complete if you have registered properly. You can start using the IDE immediately.

, , , , ,

2 Comments

ARM compiler, uploader, programming library all in XDUINO-IDE

Please support us by donating to us so we can continue to develop this project further.



easier way to pay online!

XDUINO-IDE (v0.91) with XDUINO Library:
This contains XDUINO Integrated Development Environment with upload tools (interface for programming and uploading to the device).
Please signup at Download signup page and we’ll contact you with download instructions.

Once you have downloaded and wishes to register the software for support and to let us know who you are and how we can assist you in future you can fill the form at Registration page

XDUINO Library Only
[download id=”424″ format=”1″]

Xduino currently supports the following ARM Cortex-M3 STM32f103ret6 board.

Price: US$30 + $10shipping
(Contact us here to buy)

Currently 4 in stock

(the shipping price is for Europe, decease
USA, ed
India, Singapore for other countries please contact us)
(for big quantity order please email us)

ARM STAMP Cortex-M3 STM32F10ret6 board

ARM STAMP Cortex-M3 STM32F10ret6 board

If you are interested in getting this board you can contact us.
The board has following features:

  • 5 Serial ports
  • 48 General purpose input/output pins (GPIO)
  • 16 Analog input channels 12-bits (ADC)
  • 2 Analog output channels 12-bits (DAC)
  • 512 Kbytes of Flash memory
  • 68 Kbytes of RAM
  • 3 SPI ports (2 can do I2S)
  • 2 I2C
  • 1 USB
  • 1 CAN
  • 1 SDIO
    • Use MCU 32Bit ARM Cortex-M3 64Pin (LQFP) of “STmicroelectronics”
    • Use Crystal 8.00MHz + Phase-Locked Loop (PLL), Run 72MHz frequency with speed 1.25 DMIPS/MHz to process data that is equivalent to 90MIPS
    • Has RTC (Real Time Clock) Circuit with XTAL 32.768KHz and Battery Backup connector
    • Support In-System Programming (ISP) and In-Application Programming (IAP) through On-Chip Boot-Loader Software via Port USART1 (RS232)
    • Has RS232 Communication Circuit that uses Connector 4-PIN
    • Has 48 Bit GPIO with 5V-Tolerant for independent digital applications (maximum analog input is 3.3V)
    • Use +3.3V Power Supply
    • Connector is placed on 50 Pin Header with a distance of 2.54mm (100mil) (25 pins per side) with a distance of 1.5 inch (1500mil/38.1mm), so it is quite easy to use and expand I/O Circuit. Moreover, it can be used with Project Board and PCB.

Now as XDUINO-IDE is ready for download, these are the list of components you will find in XDUINO-IDE. This platform provides ease of compiling and uploading to the ARM Cortex-M3 devices by simply clicking the button on the main interface : -).

Main components includes:

  • Free ARM compiler
  • ARM compiler with C and C++ libraries
  • ARM Cortex-M3 stm32f series mcu firmware/software uploader
  • XDUINO library for programming with Arduino-like syntax
  • Programming template in XDUINO and general ARM styles
  • and much much more..

What are you waiting for, you can signup to download it now from Download page.

, , , , , , ,

No Comments

XDUINO-IDE v0.91 available now

XDUINO-IDE is ready for you to use with ARM Cortex-M3 STM32 boards. : -) Just fill out fill in the registration form on Download page.

Here is a screen shot:

XDUINO IDE v0.91 screen shot

XDUINO IDE v0.91 screen shot

, , ,

No Comments

XDUINO-IDE v0.91 released

XDUINO-IDE (v0.91) with integrated uploader tool is finally here. The current release will only be available for those who have bought an XDUINO board from us.

If you have bought a board from us and wants to download the IDE, site please send us a note and we’ll get back to you asap.

XDUINO package with library files has been renamed XDUINO-lib.

There is also a minor upgrade for XDUINO-lib in the just released version 0.33

Happy XDUINOing

, , , , , , , , , ,

2 Comments

About XDuino

Arduino platform has definitely enabled a lot of people including those non-tech savvy ones to enter into the electronics worlds. From the beauty of Arduino, now comes the challenge in making Arduino-like environment accessible across as many hardware platforms as possible. This would enable the simplicity and yet powerful Arduino platform to harvest on more powerful resources provided by different hardware to overcome hardware limitations based on different needs.

This approach will never be fully realized without contributors. So all contributions are welcome. Also, comments/suggestions will be highly appreciated. : -)

Let’s see what wonders we can create together…

Now, a little about me. My name is Ram, I am an independent IT consultant based in Bangkok and really like the Arduino project but it did not fit my needs so I started playing with ARM and manage to understand a bit about it then started this project. Feel free to contact me via the Contact us page : -)

, , , , , , , , , , , , , , ,

No Comments