Xduino - ARM Compiler and IDE with Arduino-like support » programming example

ARM compiler, uploader, programming library all in XDUINO-IDE

Ram — Thu, 24 Sep 2009 10:59:33 +0000

Now as XDUINO-IDE is ready for download, these are the list of components you will find in XDUINO-IDE. This platform provides ease of compiling and uploading to the ARM Cortex-M3 devices by simply clicking the button on the main interface : -).

Main components includes:

Free ARM compiler

ARM compiler with C and C++ libraries

ARM Cortex-M3 stm32f series mcu firmware/software uploader

XDUINO library for programming with Arduino-like syntax

Programming template in XDUINO and general ARM styles

and much much more..

What are you waiting for, you can signup to download it now from Download page.

XDUINO-IDE v0.91 available now

Ram — Sat, 19 Sep 2009 20:31:57 +0000

XDUINO-IDE is ready for you to use with ARM Cortex-M3 STM32 boards. : -) Just fill out fill in the registration form on Download page.

Here is a screen shot:

XDUINO IDE v0.91 screen shot

XDUINO-IDE v0.91 released

Ram — Sun, 06 Sep 2009 19:58:58 +0000

XDUINO-IDE (v0.91) with integrated uploader tool is finally here. The current release will only be available for those who have bought an XDUINO board from us.

If you have bought a board from us and wants to download the IDE, please send us a note and we’ll get back to you asap.

XDUINO package with library files has been renamed XDUINO-lib.

There is also a minor upgrade for XDUINO-lib in the just released version 0.33

Happy XDUINOing

XDUINO board in stock and XDUINO-IDE coming

Ram — Thu, 03 Sep 2009 05:51:15 +0000

We have restocked XDuino boards, please check on our ‘hardware’ page to see what we have.

ARM STAMP Cortex-M3 STM32F10ret6 board

Yes, this is an official : -) announcement that XDUINO-IDE will be coming out within the next few days (not more than 1-2 days)….

ARM programming made simple with Xduino (v0.11)

Ram — Thu, 16 Jul 2009 16:31:31 +0000

With the current release of Xduino v0.11 for ARM Cortex-M3 STM32 and also future releases of other ARM mcu as well as other non-ARM mcus, here is going to be what you can call ‘Blink’ example.

Before starting, you have to compile this code along with Xduino platform libraries and load it to the board you are using. Once loaded then you can disconnect the board from the computer then connect one wire of an LED to PB7 (you can change this to other Pin on your board, make sure to also change the code) and the other to ground appropriately. Hit reset on your board and the LED should blink.

/* Xduino library initialization */
#include “main.h”

int LedPin = PB7; // as labelled on your ARM Cortex-M3 board

int main(void)
{

doInit(); //Initialize
while(1) //loop this block
{
        digitalWrite(LedPin,HIGH);
        delay(200);
        digitalWrite(LedPin,LOW);
        delay(200);
}

}

About XDuino

Ram — Sun, 12 Jul 2009 04:35:02 +0000

Arduino platform has definitely enabled a lot of people including those non-tech savvy ones to enter into the electronics worlds. From the beauty of Arduino, now comes the challenge in making Arduino-like environment accessible across as many hardware platforms as possible. This would enable the simplicity and yet powerful Arduino platform to harvest on more powerful resources provided by different hardware to overcome hardware limitations based on different needs.

This approach will never be fully realized without contributors. So all contributions are welcome. Also, comments/suggestions will be highly appreciated. : -)

Let’s see what wonders we can create together…

Now, a little about me. My name is Ram, I am an independent IT consultant based in Bangkok and really like the Arduino project but it did not fit my needs so I started playing with ARM and manage to understand a bit about it then started this project. Feel free to contact me via the Contact us page : -)